| Easy to programme, the TS790+/TS900+ gives installers
and customers unparalleled flexibility in configuration and control, assuring
them of the highest levels of protection from intruders.
Flexibility for growth
The TS790+/TS900+ can be adapted to meet changing security requirements.
Alarm systems monitor specified zones in your premises such as offices, rooms,
corridors and garages. Up to 16 of these zones can be monitored by the TS790+,
and up to 56 of these zones can be monitored by the TS900+. This gives you
almost unlimited flexibility to extend your security system as you extend
or change the layout of your premises.
Flexibility in control
If your business or residence requires different security arrangements
in different areas, for instance, where a degree of independent control over
security is needed in particular departments or on certain floors, the TS790+
and TS900+ can take care of it. That's because zones can be grouped together
into up to 4 independently programmable areas referred to as wards.
Flexibility in detail
Part-setting is a useful feature that allows you to secure parts of
your premises while permitting free access in other areas. This can be
particularly convenient in a commercial environment when staff are working
late or areas of the building are not occupied during certain times. In a
domestic situation this feature allows the downstairs of a residence to be
set during the night, or the perimeter of the house and garage to be set
while everyone is watching TV.
Flexibility for individuals
Requiring all members of staff/contractors or households to remember
a single security code number leads to inconvenience and false alarms. The
TS790+ and TS900+ allows up to 31 individuals to create their own code numbers,
often a requirement of your insurance company. Furthermore, varying levels
of system control can be assigned to these numbers. For example, cleaners
can be permitted to set but not to unset the system.
Improved management
The efficiency of management can be improved with information collected
by the TS790+ and TS900+'s 700 event memory. It logs the time, date and user
code of all system activations. This data gives an instant picture of who
was where at any time of day or night, providing managers with a powerful
investigative and analytical tool.
Remote monitoring
Remote off-site alarm monitoring can be added to the TS790+ and TS900+
system by connecting it to a commercial Alarm Receiving Centre via a RedCARE
or other telephone link. These centres continuously monitor and verify system
integrity and alarm activations and if necessary report them to the
police.
Plug on Proximity reader
The TSNETPROX PR1 is a plug-on module, which can be easily fitted
into the keypads. The module is compatible with the NETLCD, NETLED or NETARM
(not NETSTAR). Once plugged onto the keypad it allows user verification and
identification in the panels events log. Because the proximity reader works
as a direct subsitute for a user code, you can enjoy a level of security
while greatly increasing the speed with which you can gain access. Just press
the proximity tag to the keypad rather than keying in your usual user
code.
Alarm confirmation
To ensure maximum response from the Police it has become imperative
that alarm activations are confirmed. The TS790+ and TS900+ has the simplest
and most cost effective form of alarm confirmation: Sequential Alarm
Confirmation, as standard. By transmitting clear information it indicates
that a zone other than that which has caused the original alarm has activated,
hence confirming the alarm transmission is likely to be genuine.
Remote programming
The TS790+ and TS900+ can be set up to allow a remote office - typically
your Installer, Alarm Receiving Centre or a corporate security HQ, to access
the system controls via a Personal Computer and a modem. With this capability,
the TS790+ and TS900+ can be re-configured and tested by security staff located
many miles away – a reliable way to reduce cost without compromising
security.
Compliance
ACPO 2000/DD243:2002 compliance
|
